Wednesday, March 7, 2012

Topping a table with zinc sheet metal

 So here's the whole set finished up....I did a post on painting with the ASCP in "Emperor's Silk" a couple of days ago...this post is a long one but if you're curious as to how we topped the table with zinc this will show you the process....
 First is measuring of course.  And the zinc comes in sheets which have a plastic protective sheet on one side (you'll see it in some of the other photos)
 This is the adhesive that attaches the sheet metal to the surface...it helps eliminate any "bounce" between the table top and the metal...
 The clamps are there to hold the metal down nice and tight and then my husband had some boxes on it to weight it down in the center as well.  The piece of narrow wood on top of the table is just added protection against marring the surface of the metal from the clamps...
 The corners are trimmed and on this one it was a little tricky since they were rounded....he trimmed more out later as you'll see further down....
 Now he's using a "slapper" hammer which is wood covered in a heavy piece of leather...(I think he made this slapper)  you can buy these hammers any place that sells metal shaping supplies.
 Here you can see how he trimmed more out of the corners so they would lay nice and smooth...all of this will get soldered so it covers all those gaps...
At this point he tacks it into the bottom of the table with some small nails.  So it wraps all the way around the table top...
 He keeps gently tapping with the hammer to get the zinc to lay as close to the surface of the table as possible...
 So now for the soldering...we purchased the flux and zinc solder from the same place we bought our zinc.
 The soldering iron (above) is what you use to heat the solder to melt into the gaps and cracks.
 The flux is sort of like primer for paint...it helps the solder stick to the metal so you want to make sure to get down into the cracks and surfaces that you want to get soldered together...
 Lay the solder on top of the gap and melt it into the cracks with the iron...it will get filed and sanded so at first it looks really messy
 Here's the first corner ready to be filed...
 This is the filing....
 Here it is filed down and ready to sand...
 If you see holes in the solder or gaps you can add more solder and file again...you want it to be solid and completely filled in....
 It then gets sanded with 100 grit sandpaper...
 A view from underneath...
 Time to pull off the protective plastic and give it some patina...
I have some photos of the patina process (to see that my post on the patina process click HERE)we did on another piece my husband made...so another post...
I think this one is long enough--
And I am the proud new owner of 4 quarts of ASCP, (French linen, Old white, Paris grey, and Arles), some clear and dark wax AND the book with all these wonderful uses for the paint....
I can't wait to play!!!
I am submitting this to the party below...first time I've done this party...
DIY Club
And we made the top 10!!!!  Thanks DIY club!!!
Here is a link to all 10 winners...

176 comments:

  1. Replies
    1. SEO Company in Faridabad is a certified Digital Marketing Agency and SEO Company in Faridabad, India.

      Since 2015, SEO Faridabad has successfully delivered various projects which include Website Design, Search Engine Optimization (SEO), Search Engine Marketing (SEM), Pay Per Click (PPC), Online Reputation Management (ORM) and E-commerce Websites for various firms and Industries. Be it a Start-up or an MNC, SEO Faridabad has been trusted by one and all. At SEO Company Faridabad, as one of the leading SEO Agency Faridabad, we ensure that your website attains TOP rankings in various search engines like Google, Bing, Yahoo, etc. Our website promotion approach is FREE from black hat SEO techniques or any spamming methods, generally used by many cheap SEO companies in India who claim to offer guaranteed Top 5 or Top 10 ranking placements within very short time period and at surprisingly cheap SEO prices. Our Local, National and E-commerce SEO Packages are scientifically designed and time tested against various algorithm updates. We are preferred internet marketing partners for many international companies located in USA, UK, Australia, UAE (Dubai) and India who regularly outsource SEO, SEM, PPC, ORM and Web Design projects to us.
      Try Our SEO Services To Place Your Website On Top Ranks.

      Delete
    2. Hello Guys! I am Juliet Hilton. I live in Uk I’m 42 Years old, am so happy I got my blank ATM card from Calvin Grayson. My blank ATM card can withdraw £5,500 daily. I got it from Him last week and now I have withdrawn about £350,000 for free. The blank ATM withdraws money from any ATM machine and there is no name on it because it is blank just your PIN Only. It is not traceable and now I have money for business, shopping and enough money for me and my family to live on. I am really glad and happy I met Calvin Grayson because I met Five people before him and they could not help me. But am happy now Calvin Grayson sent the card through UPS and I got it in two days. Get your own card from him right now, he is giving it out for an affordable fee to help the poor even if it is illegal but it helps a lot and no one ever gets caught or traced. I’m happy and grateful to Calvin Grayson because he changed my story all of a sudden. The card works in all countries that is the good news if you are interested in getting yours : email: officialblankatmservice@gmail.com

      Delete
    3. I was searching for loan to sort out my bills& debts, then i saw comments about Blank ATM Credit Card that can be hacked to withdraw money from any ATM machines around you . I doubted thus but decided to give it a try by contacting (smithhackingcompanyltd@gmail.com} they responded with their guidelines on how the card works. I was assured that the card can withdraw $5,000 instant per day & was credited with$50,000,000.00 so i requested for one & paid the delivery fee to obtain the card, after 24 hours later, i was shock to see the UPS agent in my resident with a parcel{card} i signed and went back inside and confirmed the card work's after the agent left. This is no doubts because i have the card & has made used of the card. This hackers are USA based hackers set out to help people with financial freedom!! Contact these email if you wants to get rich with this Via: smithhackingcompanyltd@gmail.com or WhatsApp +1(360)6370612

      Delete
  2. I love the table! Happy birthday;)

    ReplyDelete
  3. Wow! Great tutorial! Love it!

    http://www.remodelandolacasa.com

    ReplyDelete
  4. Rachel! You are reading my mind! I did a class recently where I learned to age zinc. I bought the chemicals, then figured out how to cut large sheets of zinc on my table saw. I read several versions of how to get wrap a table in it, but none of them were very good. This is the most awesome tutorial, I have been wanting to try this. I am going to order the supplies online. Where did you get the large sheet of zinc? I am not sure where to begin. Thanks! -K

    PS Pinning this and featuring that awesome table next week!

    ReplyDelete
  5. WOW! It's gorgeous. I've never seen this done - so fascinating! Great tutorial! Karen (Redoux) sent me over. I'm so glad! ;)

    Have a great week!
    Roeshel

    ReplyDelete
    Replies
    1. Thanks Roeshel! I have submitted it to your party--(hope I did everything I was supposed to) very kind words about our work. We enjoy doing things together and this project was no different. I even learned to solder on this one! I appreciate Karen sending you over...thanks for checking it out...

      Delete
  6. I have no idea how to solder - that is awesome and your tutorial is FAB!

    ReplyDelete
    Replies
    1. Thanks Holly! I'm having fun learning! And thanks for the compliment on the tutorial...

      Delete
  7. Oh My goodness! Your table is beautiful and the zinc top was the crowning jewel! Wow! I always wondered how to do those corners and your instructions were amazing!
    Thanks for the tutorial!
    Susan
    Homeroad

    ReplyDelete
  8. I love this table. I have a portable kitchen piece that needs a new top. Now I have the ammo to do it like this! Great job. Congrats on the top 10 - hope you win!

    ReplyDelete
  9. oh-and did you have to go to a metal specialty place to by the zinc or was it available at lowes or home depot?

    ReplyDelete
    Replies
    1. We order online. Not something that's available "off the shelf"....

      Delete
    2. About how much did the sheet cost you? Do you have a link to where you purchased it? I love this idea!

      Delete
    3. We ordered from Roto metals online. The sheets come in various sizes and thicknesses so that determines the price.

      Delete
    4. What thickness did you use for the table?

      Delete
    5. This comment has been removed by the author.

      Delete
  10. Your table is awesome! Where did you buy the zinc online? What site?

    ReplyDelete
  11. Hello! Love this post! What did you use to patina the zinc?

    ReplyDelete
  12. Hello! Love this post! What did you use to patina the zinc?

    ReplyDelete
    Replies
    1. Robyn I just did a post the other day on the patina process....it's here...http://vanhookandco.blogspot.com/2012/08/aging-zinc.html if you want to take a look. I need to add that to this post! Thanks for asking!!!!

      Delete
  13. Wonderful -- I've had a piece of zinc on my deck waiting to top a bench but I've been intimidated. You made this look so easy. A great fall project. Thanks!
    pam h
    howtorunyourlife.blogspot.com

    ReplyDelete
  14. Wow, this looks amazing. I just broke out our soldering iron (after about 20 years of being in storage) and used it to make farmhouse looking pendant lights. I had so much fun that I'm looking for more projects to solder. Approximately how much did the zinc sheet cost?

    Great project, thanks for sharing!!!

    ReplyDelete
    Replies
    1. Thanks Brittany. I enjoy soldering too it's a fun way to work with metal! I think we paid $178 (that's not including shipping or solder) and it's a 4' by 10' piece. It comes in different gauges (thickness) also so the price goes up or down depending on what you're using it for. Thanks for stopping by!

      Delete
  15. you guys did an amazing job!!!!! Just beautiful! Thank you for sharing!

    ReplyDelete
  16. My husband and I fell in love with a zinc table the other day (but the $2800 price tag was a little out of our budget) Came home, looked online, and found your blog. LOVE it! Now we are motivated to upcycle our current table into something we love. What gauge zinc sheet did you use for the table?

    ReplyDelete
    Replies
    1. Beth we used .030 (20 gauge). We just thought anything less wouldn't be substantial enough. The thinner you go the cheaper it is but with it being a table you want it to hold up well. It's definitely much more cost effective to cover what you have!!! Ask away if you have any other questions!

      Delete
  17. Your table is gorgeous and your tutorial is fabulous. Thank you so much for sharing!

    ReplyDelete
  18. Oh sorry - I forgot to ask- what gauge did you use? Thanks!

    ReplyDelete
    Replies
    1. Thanks so much! We used .030 (20 gauge) for this project and all the others in various posts on the blog.

      Delete
  19. This comment has been removed by a blog administrator.

    ReplyDelete
  20. Sheet Metal is a material that has been sought after and used for thousands of years for durable, lasting tools and equipment. Thanks for sharing this post with us.

    ReplyDelete
  21. Amazing how simple it can be to communicate with people and have them understand a certain topic, you made my day.

    Sheet metal

    ReplyDelete
    Replies
    1. Thanks for the kind words! We enjoyed doing it and then being able to share how we did it with others....a fun project for sure.

      Delete
  22. Small bits of content which are explained in details, helps me understand the topic, thank you!

    metal suppliers

    ReplyDelete
  23. I love your zinc table! I'm wanting a sort of industrial look to my new countertops, and am trying to decide between using zinc or stainless steel for them. I'd plan to order a thicker gauge zinc to cover new kitchen countertops if I go that direction, but am worried that eventually the countertops might look TOO dented and sort of "country"-looking after awhile. Do you have a photo you could post of your tabletop as it looks today? That might help me make my decision. Thanks!

    ReplyDelete
    Replies
    1. I think I read that they made this particular table for a client. But I am also very interested in your thoughts on the sustainability of the metal top. Does it get easily dented, buckle or warp? We are starting our table in the next few weeks, I am so excited.

      Delete
    2. We did do this table for a client. So unfortunately I don't have any photos of how it looks now. If you are planning on doing it yourself though, steel is much harder--- harder to bend not as flexible to work with. We did countertops at a store for a friend with galvanized and aged it and it still looks really great. But my husband has access to a "break" which will bend the metal for you. You wouldn't be able to hammer it yourself around the edges and corners. As far as the zinc goes it is food safe. And you can always use scotch brite to smooth out the surface at any time you want. (That will also take off whatever patina has developed.) And it will look shiny and new again. Not sure if any of this helps or not and I'm usually more prompt at replying to blog comments...I must've missed this one somehow!

      Delete
  24. Great-looking table, great tutorial and I'm a new follower!
    Saw this on Pinterest. :)
    -Revi

    ReplyDelete
  25. Hi - do you remember the thickness of the steel sheet?

    ReplyDelete
  26. This comment has been removed by a blog administrator.

    ReplyDelete
  27. What a fabulous project & a wonderful tutorial. Thanks for showing me something new!

    Warmly,
    Michelle
    Faith, Trust & Pixie Dust

    ReplyDelete
  28. wow superb work. i must really appreciate your work. feeling great to see such kind of stuff.
    Leather beds in London

    ReplyDelete
  29. Nice work.

    I'm wondering if the solder is able to tarnish just as the zinc sheet? Or does that tend to always remain shiny?
    Amazing how well it blends in on the corner.
    Ben

    ReplyDelete
    Replies
    1. Ben the solder tarnishes and darkens along with the zinc. It is amazing how well it can be blended to give that smooth transition on the corners. Thanks for stopping by!

      Delete
  30. Custom wheels are one of the most popular performance enhancing options on the market today.

    Rwm casters & Superior tire

    ReplyDelete
  31. I've been wanting to cover the top of my old desk with metal for years. I always thought I'd use aluminum or tin though. Any drawbacks or advantages to either of them?

    ReplyDelete
    Replies
    1. Hello, Aluminum and tin would be easier to find locally than zinc. Roto metals is the only place I have been able to find the zinc sheet metal. The zinc is extremely maleable and easy to work and bend with hand tools. Aluminum is easy to work by hand if you have the right alloy some are very hard. Also aluminum will not patina like the zinc. Tin, steel, galvanized metal will have to be very thin to be able to work it by hand easily. Hope this helps and have fun with your project!!!

      Delete
    2. Aluminum and tin scratch very easily and it's not easy to buff out the scratches.

      Delete
  32. Just FYI, liquid nails does a very poor job of binding zinc when applied as described in this article. I used Gorilla Glue (or elmers glue MAX), or any glue that foams up. It works a LOT better. I really appreciated this tutorial, but I just wanted to relay that Liquid Nails does not stick to zinc sheets well at all.

    ReplyDelete
  33. Your dazzling work has won my heart. I’ll come soon to your site with new hope. claim compensation

    ReplyDelete
  34. Your table is gorgeous and your tutorial is fabulous.
    Plywood Company in India

    ReplyDelete
  35. The zinc metal top looks great. I'm glad to see so many creative ideas involving metal integrated into every day items. It looks great, i'll probably make one of these more my bar. Thanks

    Ansel Marvin | J&E Metal

    ReplyDelete
  36. thanks for this attractive table, the table cover is made with Sheet Metal Forming process.

    ReplyDelete
  37. I'm making a zinc top table. Is one 5' length of solder enough for all 4 corners?

    ReplyDelete
  38. That is a really cool project. I was wondering how you would fix the corners as I was reading through the beginning. That was a great way to solve the problem.
    http://www.sheetmetal.net.au/catalogue/roofing-sheets---accessories/index

    ReplyDelete
  39. Topping a table with zinc sheet metal. So here's the whole set finished up... imetaldiningchairs.blogspot.com

    ReplyDelete
  40. Rachel,

    I haven't been able to find wide sheets, only rolls 24" wide. Of course I don't want seems on a wide top, so where can I get 36 - 48" sheet stock?

    Also, what guage zinc sheet did you use? I guess thinner can get wrinkly, and thicker gets costly and difficult to bend around corners without slap, slapping. So what thickness did you settle on?

    Thanks for the reply,
    Jason

    ReplyDelete
  41. Hi Rachel-
    Sorry if this posts twice-I have some questions about your table process.
    First, how much extra did you use to wrap underneath the table? My tabletop is 1 1/2" thick, so I was thinking an extra inch all around...?
    Second did you secure specifically with zinc nails or would any nail work?
    And lastly, did you do anything to the edges of the zinc sheet under the table? I was wondering about sharp edges and little fingers and knees under the table.
    Thanks for your help!
    Stefanie

    ReplyDelete
  42. I've just found this - this is the BEST looking tutorial I've ever seen - thank you! We are about to renovate our kitchen and I'm covering the old kitchen table in zinc.... Reading your amazing instructions and all the reader comments has made me much more confident in starting on this job.... and we have all the tools bar a slapper! Bonus. But I do have one question that I couldn't find an answer to in your blog or on the reader's comments... How did you cut the zinc sheet and what with? Its just that the corner before you soldered it looked so neat and tidy! Many thanks in advance... Caroline

    ReplyDelete
  43. I am going to buy miter saw. I read many website and I see Dewalt DW175 which suitable my need. I am going to buy this site http://www.mitersawclub.com/ . But I don’t know where is the best seller about miter saw. Give me your opinions

    ReplyDelete
  44. I purchased a "factory reconditioned" DeWalt compound miter saw on Amazon several years ago. It arrived in pristine condition and continues to serve flawlessly with more than moderate use.

    ReplyDelete
  45. If you are looking for "the juice" to patina your zinc search cupric sulfate. Also search out High Falls Furniture Company (hffcom) on youtube. He sells the concentrate on ebay.

    http://www.ebay.com/sch/i.html?_odkw=hffcom&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xhffcom.TRS0&_nkw=hffcom&_sacat=0

    https://www.youtube.com/watch?v=kkQb3BEKAes

    http://www.highfallsfurniture.com/

    Roto Metals is an excellent source for all things Zinc, check them out. Nice videos on youtube as well.

    I used .027 on my kitchen counters with the pre-applied dark patina from Roto. Also I did nothing to "seal" them. I think the worn look has a nice story to tell, it suits my particular lifestyle and home-style perfectly. Oh, I also glued a sheet from floor to vent behind my kitchen range and the backsplashes as well from counter top to the upper cabinets.

    I subscribe to the notion that zinc is a living material, it changes over the course of time...stains here and there, spots as well. I like that, some may not. Steps can be taken to "seal" it to guard against changes but then maybe you should be using formica instead.

    ReplyDelete
  46. This comment has been removed by the author.

    ReplyDelete
  47. It’s never too late to develop your data and your contents really excite me a lot.i loved this

    ReplyDelete
  48. That is Very really great Nice Blog Post, Thanks for sharing this intersting and very informative content. Always keep sharing.

    sheet metal industries faridabad


    ReplyDelete
  49. Hello, thanks so much for this blog it got me inspired to do my bench top and it's coming along well. I was wondering what size (power) your soldering iron was? I've read elsewhere that I need a 150-200w soldering iron for zinc this thick (I've used the same gauge as you) which is quite an investment. However in the photo your solderer doesn't look that 'industrial'? Thanks very much.

    ReplyDelete
    Replies
    1. For soldering the main thing is to melt the solder; you should be fine with anything decent.

      Delete
  50. This comment has been removed by the author.

    ReplyDelete
  51. This comment has been removed by the author.

    ReplyDelete
  52. Very nice project. I've never even thought about sanding down solder - it looks great!

    Concord Sheet Metal

    ReplyDelete
  53. 304 316 321 316LWelding And Seamless High Pressure Stainless Steel Pipe

    BUYNOW


    Price : US $1800-2300
    Minimum Order : 1 Ton
    Location : China (Mainland)
    Company : Wuxi Pinrui Stainless Steel Co., Ltd.
    Response Rate :
    Outer Diameter : 20mm~400mm
    Thickness : 1mm~30mm
    Application : decorative
    Steel Grade : 300 Series
    Standard : ASTM,AISI,DIN,EN,GB,JIS
    Certification : SGS

    steel Pipe
    steel pipe industry
    stainless steel pipe
    sch40 steel pipe
    carbon steel pipe dimensions table

    BUYNOW

    ReplyDelete
  54. Waw really Best Fabrication sheet metal Blog Post, Thanks for plesse sharing this intersting and very informative content. Always keep sharing.
    sheet metal manufacturers Faridabad

    ReplyDelete
  55. Wow! It look so good Shooting Benches i love it very much. Thanks for sharing!

    ReplyDelete
  56. That is a really amazing sheet metal Blog Post, Thanks for plesse sharing this intersting and very informative content. Always keep sharing.

    sheet metal manufacturer noida

    ReplyDelete
  57. Polycarbonate panels are finding use in an increasing number of scenarios. They are virtually unbreakable and can withstand massive force.
    Polycarbonate Multiwall Sheets in India

    ReplyDelete
  58. Thanks for some great new ideas. I am really impressed by reading this blog!

    410 stainless steel pipe

    ReplyDelete

  59. This sheet matal your Blog post is very Nice and useful. Thank you fro sharing the infromation .

    sheet metal industries faridabad

    ReplyDelete
  60. great work! I love the way you have written this so beautifully! keep writing! marvellous post by the author

    Metal cutting bandsaw machines

    ReplyDelete
  61. Really amazing sheet metal fabrication Blog Post and best one of the loading packers and movers service in noida Good Information. Thanks for plesse sharing this informative content. Always keep sharing.

    sheet metal manufacturing supplier

    ReplyDelete
  62. Nice blog.. Thanks for sharing it. I read many post and many information but this information is really informative.Visit us: http://www.perfectroofing.co.in/

    ReplyDelete
  63. Presently a days home apparatuses are most imperative accomplice of our lives. we can,t do nothing without these hardware. you ought to be consent to this truth and ought to simple your existence with the use of Stainless steel Tables, Ice Makers, Beverage coolers and Fridges, Slush Machines , Soft Serve Machines, Popcorn Machines, Butchery Equipment , Bakery Equipment , Refrigeration Equipment , Catering Equipment available to be purchased, Catering Equipment , Stainless steel Tables, Underbars, Display refrigerators, Bain maries, chip fryers,fryers, Cold room, Freezer room, Ice cream Machine and Ice Machines.

    ReplyDelete
  64. Wow nice and great sheet metal post. Thanku share this post

    sheet metal manufacturing companies gurgaon

    ReplyDelete
  65. Get cheap Used CNC Machine and Second Hand Machines for the metalworking machines. asset trade germany is the best Used Machine for sale

    Second Hand Machines

    ReplyDelete
  66. This comment has been removed by the author.

    ReplyDelete
  67. excellent post!
    this information is very useful for my organization.
    more detail about metal roofing sheets then contact us:
    http://www.faisalroofing.com

    ReplyDelete
  68. Thanks for the information ,check the best steel plate dealers in chennai

    ReplyDelete
  69. Good movie!
    This is one of the most interesting blogs that I have seen, keep it up
    And my blog is best-cooler.reviews

    ReplyDelete
  70. Wow you are wanderfull and usefull post .Good ang High quality in Low cost sheet metal solutions provider in Delhi,Faridabad,Noida and Gurgaon for sheet metal services.

    sheet metal manufacturing companies noida

    ReplyDelete
  71. thanks for sharing. Steel Dealers in Chennai supply a fine quality sheet metals which is used for various purposes at different places.

    ReplyDelete
  72. Nice Post. Find the best Stainless Steel Wall Guards at Protek Systems for best wall protection.

    ReplyDelete
  73. Thanks for sharing!Furniture is really a important element of an office and home which add style and beauty.
    Table Chairs For Sale
    Furniture Stores In Denver Colorado
    Chairs For Dining Table

    ReplyDelete
  74. The entire information is really good and some good insights available. Looking forward to do more clicks.
    NOW Zinc

    ReplyDelete
  75. (Plans Review + Book Download) - 16000 Woodworking Plans and Projects...
    https://woodworkingplanspro.weebly.com/

    ReplyDelete
  76. You wrote an informative article, Thank you.I am planning to buy measuring instruments for my company. Does anyone knows about Filter Gauge ?

    ReplyDelete
  77. Your post is really amazing. You have done an awesome work. I like your idea of sharing this post with us. Keep sharing.

    Engine Head Repair

    ReplyDelete
  78. Nice Post. Find the best Stainless Steel Walls protection at Protek Systems for best wall protection.

    ReplyDelete
  79. Hingst was recognized with numerous sales achievement awards.
    Roofing Corp 

    ReplyDelete
  80. Good Post. Find the best Metal Wall Protection at Protek Systems for best wall protection.

    ReplyDelete
  81. This comment has been removed by the author.

    ReplyDelete
  82. I like it your sheet metal and automobile post.really very interesting and useful information.thanks for share this post.we provide high quality automobile parts and sheet metal,in low cost.please have a look over here.
    fire extinguisher mounting bracket

    ReplyDelete
  83. There might some different approaches according to place or knowledge. Your skills depends on how you got an opportunity and where you have trained. Personal or professional training might distinguish between each other. Wood Dining Table Industrial Rustic

    ReplyDelete
  84. Easily, the is actually the very best topic on this registry related issue. I participate in your conclusions and will eagerly anticipate the next updates. Just saying thanks will not you need to be sufficient, for the fantasti c lucidity in your writing. I will instantly grab your rss feed to keep informed of any updates.mezzanine floor essex

    ReplyDelete
  85. It's very rare that people teaches with the help of pictures but you did this, essential content with images that we can implement this.

    Thank you

    Galvalume Sheet

    ReplyDelete
  86. Very informative blog . It was a brilliant effort , the way you explained the whole process with images , really impressive.

    Wireless Level Sensor

    ReplyDelete
  87. Find the best Metal Wall Protection at Protek Systems for best wall protection.

    ReplyDelete
  88. Wonderfull creation and finishing of table corner. Thank you for sharing.
    sheet metal manufacturer gurgaon

    ReplyDelete
  89. Hi, Nice post.
    Thanks for sharing great post. Keep continue.

    ReplyDelete
  90. Zinc Dust that are used in Chemical & Pharmaceutical Industry, Zinc powder Zinc Dust manufacturers in India includes Paints & Coatings, Petroleum & Lubrication Industry.

    ReplyDelete
  91. zinc sheet metal Table topping is looking adorable and color is also charming to see clean and smooth view of table, You need to create you own web design site and show multiple colors and price with that that can be helpful for users.

    ReplyDelete
  92. Write more; that’s all I have to say. It seems as though you relied on the video to make your point.
    fire and safety course in chennai

    ReplyDelete
  93. Great Post. Get the best Stainless Steel Door & Wall Protection at Protek Systems for best wall protection.

    ReplyDelete
  94. This comment has been removed by the author.

    ReplyDelete
  95. I am really impressed with your blog article, such great & useful knowledge you mentioned here.
    Your post is very informative. I have read all your posts and all are very informative. Thanks for sharing and keep it up like this.
    polycarbonate roofing sheets

    ReplyDelete
  96. A great finish!
    https://www.metalstampingo.com/

    ReplyDelete
  97. Very nice and interesting blog. It`s always great to read about people who make all these useful things for everyone.

    Website Laten Maken

    ReplyDelete
  98. Great and nice blog thanks sharing..I just want to say that all the information you have given here is awesome...Thank you very much for this one. http://www.schoolerpsoftware.in/

    ReplyDelete
  99. Thanks for sharing the best posts they very nice and very help us. You made a good site its very interesting one. I am very impressed with your job about this category that you did well. Robotic Automation in India | Gantry Robots |Special Purpose machine


    ReplyDelete
  100. I want to big thanks for sharing a wonderful article Nice work, Thanks for sharing the best posts they very nice and very help us. You made a good site its very interesting one

    https://sattawebsite.blogspot.com/

    ReplyDelete

  101. you have written a wonderful post thank you for sharing.

    Best Website Designing Company in Haldwani with over 8 years of Experience

    Website Designing in Haldwani

    ReplyDelete



  102. INSTEAD OF GETTING A LOAN,, I GOT SOMETHING NEW
    Get $10,050 USD every week, for six months!

    See how it works
    Do you know you can hack into any ATM machine with a hacked ATM card??
    Make up you mind before applying, straight deal...
    Order for a blank ATM card now and get millions within a week!: contact us
    via email address:: besthackersworld58@gmail.com or whats-app +1(323)-723-2568

    We have specially programmed ATM cards that can be use to hack ATM
    machines, the ATM cards can be used to withdraw at the ATM or swipe, at
    stores and POS. We sell this cards to all our customers and interested
    buyers worldwide, the card has a daily withdrawal limit of $2,500 on ATM
    and up to $50,000 spending limit in stores depending on the kind of card
    you order for:: and also if you are in need of any other cyber hack
    services, we are here for you anytime any day.
    Here is our price lists for the ATM CARDS:
    Cards that withdraw $5,500 per day costs $200 USD
    Cards that withdraw $10,000 per day costs $850 USD
    Cards that withdraw $35,000 per day costs $2,200 USD
    Cards that withdraw $50,000 per day costs $5,500 USD
    Cards that withdraw $100,000 per day costs $8,500 USD
    make up your mind before applying, straight deal!!!

    The price include shipping fees and charges, order now: contact us via
    email address::besthackersworld58@gmail.com or whats-app +1(323)-723-2568

    ReplyDelete
  103. “As a military family, we are very thankful for Mr Lee professional service. he was attentive, knowledgeable and took his time to walk us through the loan process. We were informed in a timely manner of any pertinent details we needed to take into account. He was very approachable, understanding and trustworthy. We can’t thank him enough for his excellent service. We highly recommend his and feel blessed to have had his loan assistance to enable us have our home purchase. Military and non military families, Mr Lee  you would want to work with for your home purchase & any kind of loan asistance!”  
    Mr Lee Loan Officer Contact Details:WhatsApp : + 1-989-394-3740E-Mail: lfdsloans@outlook.com

    ReplyDelete
  104. software testing company in India
    software testing company in Hyderabad
    Thanks for sharing such a wonderful post with us.
    very interesting and nice post.
    keep sharing.

    ReplyDelete
  105. READ CAREFULLY TO HELP SOMEONE
    My name is clara i'm from uk,i want to use this opportunity to disclose a vital information which I was asked not to.i have a brother who work as an anonymous he was the one who told me about this FREE CARD that you can used in buying and cash out a limit amount of money.he further told me their manager specialize in doing FREE CARD that he his going to send me his email but i should not expose him to manager in case he ask me how i got his email, that i found it on the internet so two days after i contacted him he reply was what's your name and how did you got my email which i told him exactly what my brother told me so after that he further asked me how he can be off help to me which i did by explaining my financial situation.After my explanation he asked some question which i answer then he reply by telling me he his a God fearing man that he was touch by my story that his going to help me.i was so happy he didn't rejected my offer.   So after the interaction he ask me to give him some days that he will get back to me,then after a week interval in the morning i receive a package unknowingly to me he was the FREE CARD follow by the instruction how am going to register and used it.today making it a year plus that have been using this FREE CARD.  NOTE;my major aim of revealing this information is because someone out there is passing through financial challenge you can as well reach him via email [officialfreecardmanager@gmail.com]
     TRY YOUR LUCK WITH GOD ALL THINGS ARE POSSIBLE

    ReplyDelete
  106. For best outcomes in IAS test, civil administrations, UPSC tests join Ramanasri IAS Institute now. We give the best investigation material to the two Prelims and principle test of IAS. Ramanasri IAS Institute is the top instructing place for UPSC and common administrations tests which furnishes a high calibre of training with singular consideration. You can concentrate under the specialists and clear the IAS tests accomplishing highest levels.



    ias zoology

    ReplyDelete
  107. Thank you so much for sharing. Keep updating your blog. It will very useful to the many users
    Sand Filter Manufacturers in gurgaon
    Sand Filter Manufacturers in Dwarka

    ReplyDelete
  108. I was searching for loan to sort out my bills& debts, then i saw comments about Blank ATM Credit Card that can be hacked to withdraw money from any ATM machines around you . I doubted thus but decided to give it a try by contacting (smithhackingcompanyltd@gmail.com} they responded with their guidelines on how the card works. I was assured that the card can withdraw $5,000 instant per day & was credited with$50,000,000.00 so i requested for one & paid the delivery fee to obtain the card, after 24 hours later, i was shock to see the UPS agent in my resident with a parcel{card} i signed and went back inside and confirmed the card work's after the agent left. This is no doubts because i have the card & has made used of the card. This hackers are USA based hackers set out to help people with financial freedom!! Contact these email if you wants to get rich with this Via: smithhackingcompanyltd@gmail.com or WhatsApp +1(360)6370612

    ReplyDelete
  109. me and my husband are here to testify about how we use Oscar White black ATM card to make money and also have our own business today. Go get your blank ATM card today and be among the lucky ones. This PROGRAMMED blank ATM card is capable of hacking into any ATM machine,anywhere in the world.It has really changed our life for good and now we can say we are rich and we can never be poor again. You can withdraw the maximum of $5,000 daily and $140,000 a month, We can proudly say our business is doing fine and we have up to $20,000 000 (20 millions dollars in our account) Is not illegal,there is no risk of being caught ,because it has been programmed in such a way that it is not traceable,it also has a technique that makes it impossible for the CCTV to detect you..For details and cost on how to get yours today, email the hackers on : oscarwhitehackersworld@gmail.com or what's-app him +1(513)-299-8247 .

    ReplyDelete
  110. Bedsteads are what most of us consider a typical bed frame. The mattress support is usually made of wood slats that can be very flexible or tough and rigid. cheap truck mattress

    ReplyDelete
  111. Testimony on how I received my programmed blank atm card to withdraw a maximum of $7,500 daily.

    I would without reservation recommend working with ATM GENIUS LINKS, My Name is Susan Cody. Programmed Blank Atm Card is no longer a news or a new trend I've been reluctant in purchasing this blank Atm Card all because of what I heard about it online everything seems too good to be true, But I was convinced & shocked when my friend at my place of work got a Programmed Blank Atm Card from ATM GENIUS LINKS & today we both confirmed it really works, without delay I gave it a go. Ever since then I've been able to make a with-drawer of $7,500 daily from the Programmed Atm Card. I'm so excited that ever since I ordered & paid for the delivery of the Programmed Atm Card, I didn't get scammed & now I have been able to arrange my life with this Programmed Atm Card, I own a House & a business now kindly contact them today for more inquiries and enlightenment via E-mail: atmgeniuslinks@gmail.com / ICQ: https://icq.im/Anouymous_CC

    Your Satisfaction is their Aim and your working with them will be of a good experience, kindly contact them today for more inquiries and enlightenment via E-mail: atmgeniuslinks@gmail.com / Telegram: @Anonymous_Ccs / WhatsApp: +1-713-389-6778.

    ReplyDelete
  112. This information is magnificent. I understand and respect your clear-cut points. I am impressed with your writing style and how well you express your thoughts.types

    ReplyDelete
  113. This information is magnificent. I understand and respect your clear-cut points. I am impressed with your writing style and how well you express your thoughts.

    ReplyDelete
  114. I was searching for loan to sort out my bills& debts, then i saw comments about Blank ATM Credit Card that can be hacked to withdraw money from any ATM machines around you . I doubted thus but decided to give it a try by contacting (smithhackingcompanyltd@gmail.com} they responded with their guidelines on how the card works. I was assured that the card can withdraw $5,000 instant per day & was credited with$50,000,000.00 so i requested for one & paid the delivery fee to obtain the card, after 24 hours later, i was shock to see the UPS agent in my resident with a parcel{card} i signed and went back inside and confirmed the card work's after the agent left. This is no doubts because i have the card & has made used of the card. This hackers are USA based hackers set out to help people with financial freedom!! Contact these email if you wants to get rich with this Via: smithhackingcompanyltd@gmail.com or WhatsApp +1(360)6370612

    ReplyDelete
  115. INSTEAD OF GETTING A LOAN,, I GOT SOMETHING NEW
    Get $5,500 USD every day, for six months!

    See how it works

    Do you know you can hack into any ATM machine with a hacked ATM card??
    Make up your mind before applying, straight deal...
    BE SMART AND BECOME RICH IN LESS THAN 3DAYS....It all depends on how fast you can be to get the new PROGRAMMED blank ATM card that is capable of hacking into any ATM machine, anywhere in the world. I got to know about this BLANK ATM CARD when I was searching for a job online about a year ago.. It has really changed my life for good and now I can say I'm rich and I can never be poor again. a family friend introduce us to them last year after i first sure the review online and my wife is a full house wife could not support looking for another good job was fucking hell, this hack card enables you to make withdraws on any ATM card in the world without having any cash in account or even having any bank account you can also use it to order items online, The least money I get in a day it is about $50,000.(fifty thousand USD) Even now and then I keeping pumping money into my account. Though it is illegal, there is no risk of being caught ,because it has been programmed in such a way that it is not traceable, it also has a technique that makes it impossible for the CCTVs to detect you. They also trade on bitcoin, For details on how to get yours today, email the hackers on (mrmichealblankatmcard@gmail.com)

    ReplyDelete
  116. HAVE YOU BEEN IN SEARCH FOR GENUINE HACKER'S ONLINE?. HAVE YOU LOST YOUR MONEY TO BINARY OPTION SCAM OR ANY ONLINE SCAM WHATSOEVER?. WELL, YOU HAVE FOUND REDEMPTION .

    BLANK ATM CARD :We have specially programmed BLANK ATM CARDS that can be used to hack any ATM machine, these ATM cards can be used to withdraw at the ATM or swipe, stores and outlets. We sell this BLANK CARDS to all our customers and interested buyers worldwide, the BLANK CARDS has a daily withdrawal limit of $5000 in ATM and up to $50,000 spending limit in stores. and also if you are in need of any other cyber hacking services, we are here for you at any time any day. Email :
    Email:Creditcards.atm@gmail.com
    WhatsApp: +1(539) 888-2243

    -hack into any kind of phone
    _Increase Credit Scores
    _western union, bitcoin and money gram hacking
    _criminal records deletion
    _BLANK ATM/CREDIT CARDS
    _Hacking of phones(that of your spouse, boss, friends, and see whatever is being discussed behind your back)
    _Security system hacking...and so much more. Contact THEM now and get whatever you want at
    Email:Creditcards.atm@gmail.com
    WhatsApp: +1(539) 888-2243
    You can also contact us on Telegram.
    ����������✔����������������������������

    ReplyDelete
  117. Investing online has been a main source of income, that's why knowledge plays a very important role in humanity, you don't need to over work yourself for money.All you need is the right information, and you could build your own wealth from the comfort of your home!Binary trading is dependent on timely signals, assets or controlled strategies which when mastered increases chance of winning up to 90%-100% with trading. It’s possible to earn $10,000 to $20,000 trading weekly-monthly, just file a complaint with Mr. William, I had almost given up on everything about binary trading and ever getting my lost funds back, till i met with him, with his help now i have my lost funds back to my bank account and I can now trade successfully with his profitable strategies and software!! Email: GLOBALFXINVESTMENT3@GMAIL.COM

    ReplyDelete
  118. Top ranking is very important for your online business and it is the only way to success online. According to the sources, the first page of Google gives 95 percent web traffic whereas if your website are coming to the second page, then you will get only 5 percent of the total traffic, so rank your website at first page on google is important for your business.

    seo company in Faridabad

    ReplyDelete
  119. Thank You for this article is very helpful and much required information - https://sbpauto.com/shim/

    ReplyDelete
  120. The Article designs are very nice and this is a very unique content than any other designing blogs in my point of view. Keep updating more in future.
    Here My website for Pubg Mobile MOD APK check out for all sort of MOD APK.

    ReplyDelete
  121. Wow I really enjoyed to read that all i will always follow You thanks for the great article.
    It conatains so good knowledge. Full of informative article.
    Here My website for Best seedbox

    ReplyDelete
  122. I would like to thanks for sharing such a nice blog.
    Manufacturing Processes is a specialist business directory comprising of UK engineering companies. To find the UK engineering company for your next project then just click on Metal Stamping companies UK the manufacturing process specialism or skill your are needing from the list.

    ReplyDelete
  123. Thanks for sharing such an informational blog which will surely be a big help to the small medium enterprise so that they can choose the best suited tool for their business.
    Online School Management Software

    ReplyDelete
  124. Mtek Sourcing are the most promising produces of sheet metal components manufacturers in India down a decade. there is a robust growth in manufacturing of metal sheet as there is increase in population which results in higher demand of constructions and renovation of various commercial sectors.

    ReplyDelete
  125. Wow..Nice blog shared with us. Buy Pearl Metallic Table Tents From PrintMagic that are an effective tool to put your promotion in front of receptive consumers and that also help optimize profits. They are an enticing form of advertising that stays right and in front of your customers and urges them to order your products or use your services. Print Magic also understands the need for high-quality and attention-grabbing Personalised Pearl Metallic Table Tents that stand out. Upload your custom design and pick from several personalization Table Tents Printing options to create just what your brand needs!

    ReplyDelete
  126. MS steel Dealers & suppliers in chennai | All Types of steels products in chennai

    Looking for the best MS steel supplier in Chennai, India? Contact : +91 92832 10628 saaj steels chennai. We Saaj Steels is now offering the finest MS steel products with best price in chennai.SAAJ Steel is a leading dealers, distributors, suppliers and manufacturers of steel products in chennai and tamilnadu. We have stocks of all sizes and sections and we can give delivery on time.
    M/s. Saaj Steel Corporation
    No.102, Mogappair road,
    Mannurpet, Padi,
    Chennai-600 050,
    Tamilnadu, India.
    Cell : +91 92832 10628
    Email : saajsteel@gmail.com

    ReplyDelete
  127. This comment has been removed by the author.

    ReplyDelete
  128. For those working in contracting, engineering, and architecture, your blog is quite beneficial. Here, knowledge on alloy carbon steel can be exchanged. Get in touch with us if you'd like further information.

    ReplyDelete
  129. Discover top-notch Finance Business Equipment solutions tailored to elevate your company's operations. Our extensive range of products ensures efficiency, reliability, and scalability, meeting the unique needs of financial enterprises. From advanced software to high-performance hardware, find everything you need to streamline your financial tasks and drive growth. Upgrade your finance business equipment today for unparalleled operational excellence.

    ReplyDelete